Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. G70
  6. : How do you remove the front bumper of the Genesis G70?

Genesis G70 - Video tutorial

Model: Genesis G70 MK 1 - Years 2018-2024
Part: Front bumper
Operation: How do you remove the front bumper of the Genesis G70?

In order to remove the front bumper of the Genesis G70 you have to open the hood, so that you can loosen the screws that secure the bumper from the top: here there will also be rivets that must be removed. Subsequently, you can proceed by unscrewing the screws that secure the bumper also from the inside of the two wheel arches of the front wheels: in this way it will be possible to completely detach the bumper, disconnecting the connectors placed inside. Then it will be necessary to connect the new one, putting it in position and fixing it with the appropriate screws.


Posted on 7 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos