Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the 2008 GMC Sierra engine oil change notice

Model: GMC Sierra MK 3 - Years 2007-2014
Part: Warning light – error code

The guide shows how to reset the engine oil status of the 2008 GMC Sierra. The reset procedure for the upcoming oil change warning is very simple and is done in a few steps. The first step is to secure the vehicle. At this point, turn on the instrument cluster only. Press the accelerator pedal five times in succession to the full scale. When finished, wait twenty seconds before turning off the instrument panel completely. Switch the ignition back on and start the engine to finish the procedure correctly. Repeat the entire procedure if not correctly resolved.

Posted on 16 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the GMC Sierra?
Where is the fuse box located in the cabin of the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this new guide dedicated to all of you who own a GMC Sierra, we will discover the various steps you need to follow if you intend to locate the fus…
Where is the fuse box of the GMC Sierra 5 located?
Where is the fuse box of the GMC Sierra 5 located?
GMC Sierra (2019-2026 / MK 5) In this new guide of ours, we will discover the steps you need to take in order to quickly find the fuse box of your GMC Sierra Mk5. First of all, ma…
How to reset the oil light on GMC Sierra 2016
How to reset the oil light on GMC Sierra 2016
GMC Sierra (2014-2018 / MK 4) If when you turn on your 2016 GMC Sierra you notice the engine oil light staying on despite having already changed the fluid and filter then all you …

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos