|
Do it yourself
| |||
| ||||
Replacing the Front Wheel Bearing on a GMC Savana
Model: GMC Savana
MK 2
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
Today, we will go through step-by-step instructions to remove and replace the front wheel bearing on a GMC Savana in simple and quick steps. First, lift the vehicle and start by removing the front wheel. Next, unscrew the bolts securing the front brake caliper to remove it from the rotor, as shown in the video. Now, unscrew the additional bolts from the brake rotor, removing the rear bolts from the wheel hub. Remove the old bearing and replace it with the new one, applying the reverse procedure of disassembly!
Updated on 7 July 2026 by ScegliAuto
Related tutorials
GMC Savana
(1996-2002 /
MK 1)
Replacing the remote battery for the GMC Savana, as shown in this tutorial, is an extremely simple and quick task. To do this, you will need a flathe…
GMC Savana
(1996-2002 /
MK 1)
Thanks to the very simple and minimalist design of your GMC Savana key, replacing the battery inside is particularly easy and quick. Below, you will …
GMC Savana
(2003-2024 /
MK 2)
To replace the front brake pads of the GMC Savana, lift the vehicle using a jack or lift. This will allow you to loosen the bolts securing the wheel,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |