Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's main instructions will show us the process of disassembling and replacing the front brake pads of the Harley Davidson Sportster motorcycle. First, we put the motorcycle on the stand and start unscrewing the fastening screws of the front brake caliper, removing it from the disc; then we press on the caliper piston to remove the old pads, as shown in the video. At this point, we install the new original brake pads, first cleaning the caliper from any residual dirt; then we reassemble the entire braking system!

Posted on 18 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Harley Davidson Sportster
How to Replace the Front Brake Pads on a Harley Davidson Sportster
Sportster This guide provides instructions for removing and replacing the front brake pads on a Harley Davidson Sportster. First, place the bike on a stand and…
How to replace the front brake pads of the Harley Davidson Sportster
How to replace the front brake pads of the Harley Davidson Sportster
Sportster Following these brief steps, we will see the instructions that allow us to disassemble and replace the front brake pads of the Harley Davidson Sports…
How to Replace the Rear Brake Pads on the Harley Davidson Sportster
How to Replace the Rear Brake Pads on the Harley Davidson Sportster
Sportster Today, in this brief and simple guide, you will learn how to replace the rear brake pads on the Harley Davidson Sportster. First, place your bike on …

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos