Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Carburettor on the Harley Davidson Sportster

Model: Harley Davidson Sportster
Part: Carburetor

Video tutorial

These brief and simple steps will show you how to dismantle and replace the carburettor on the Harley Davidson Sportster. First, place the bike on a stand and begin by removing the air intake duct by unscrewing the clamp screw; then remove the gasket, as shown in the video.

At this point, unscrew the two fixing screws, disconnecting and removing the carburettor (disconnect the throttle and choke cables and then the fuel line). Carry out the overhaul or replacement of the carburettor, refitting it and making the necessary connections.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Harley Davidson Sportster?
How to Dismantle the Engine of the Harley Davidson Sportster?
Sportster To dismantle the engine of the Harley Davidson Sportster, first loosen the screws that secure the engine within its housing, disconnecting all releva…
How to Dismantle the Engine of the Harley Davidson Sportster
How to Dismantle the Engine of the Harley Davidson Sportster
Sportster To dismantle the engine on the Harley Davidson Sportster, first loosen the bolts securing the engine block within its housing, disconnecting all rele…
How to replace the motor oil in the Harley-Davidson Sportster?
How to replace the motor oil in the Harley-Davidson Sportster?
Sportster In this tutorial we can see how to replace the motor oil in the Harley-Davidson Sportster, a very simple and quick operation. First of all, make sure…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos