Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
First, unscrew the two screws that secure the rear brake light laterally. Once done, you can pull the light out of its housing and locate the small connector where the bulb is placed. Unscrew this connector from the bottom, pulling it out of the housing along with the bulb, which you can then simply pull out to insert the new one. Ensure it is securely fitted, then insert and screw the connector back in place. Refit the light by screwing in the two lateral fixing screws. Check that it functions correctly.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Harley Davidson Road King
Road King To replace the headlight bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlight. On…
How to Replace the Headlamp Bulb on a Harley Davidson Road King
How to Replace the Headlamp Bulb on a Harley Davidson Road King
Road King To replace the headlamp bulb on a Harley Davidson Road King, loosen the screw located at the bottom of the chrome trim surrounding the headlamp. Once…
How to Replace the Headlight and Bulb on a Harley Davidson Road King
How to Replace the Headlight and Bulb on a Harley Davidson Road King
Road King This guide shows how to disassemble and replace the headlight and bulb on a Harley Davidson Road King, following these simple steps. First, remove th…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos