Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, you will learn how to remove and replace the air filter of the engine on a Harley Davidson Sportster, following the instructions below. First, place the stand on your bike and start by unscrewing the two screws securing the air filter box cover using an Allen key; then remove the cartridge inside by unscrewing additional screws, as shown in the video. At this point, replace the air filter with the new one, inserting and securing it in the correct orientation; finally, install the metal cover!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sportster These brief and simple steps will show you how to dismantle and replace the carburettor on the Harley Davidson Sportster. First, place the bike on a …
Sportster To replace the clutch on a Harley Davidson Sportster, unscrew the screws securing the cover on the left side of the bike. Once the screws are loosene…
Sportster In this video description, you will see how to remove and replace the original grips on a Harley Davidson Sportster in simple steps. First, unscrew t…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos