Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow this guide for instructions on how to remove and replace the headlight bulb on a Harley Davidson Electra Glide by following these simple steps. First, place your motorcycle on a stand and start by removing the front headlamp, unscrewing the fixing screws located on the side frame; then take out the optical unit and disconnect the electrical connector of the bulb, as shown in the video. At this point, release the metal clip to remove and replace the bulb with a new one of the correct type and with the same fitting, finally refitting the headlamp!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on a Harley-Davidson Electra Glide?
How to replace the headlight bulb on a Harley-Davidson Electra Glide?
Electra Glide In this tutorial, we will see how to replace the headlight bulb on a Harley-Davidson Electra Glide, a very simple and quick operation. First, ensure …
How to Replace the Clutch on a Harley Davidson Electra Glide?
How to Replace the Clutch on a Harley Davidson Electra Glide?
Electra Glide You can replace the clutch on the Harley Davidson Electra Glide by loosening the screws that secure the panel on the right side of the bike, in the c…
How to Replace the Battery on the Harley Davidson Electra Glide
How to Replace the Battery on the Harley Davidson Electra Glide
Electra Glide This guide provides the main instructions for removing and replacing the battery on the Harley Davidson Electra Glide motorcycle. First, remove the r…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos