Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the oil in your Harley Davidson Street Bob, follow these detailed but concise steps. Make sure the engine is cold before starting. Find the oil drain plug on the bottom side of the engine and unscrew it to allow the old oil to drain completely into a suitable container. While the oil is draining, check the oil filter for any metal debris and clean the area around the drain plug. Tighten the drain plug securely once the draining is complete. Next, locate the upper oil plug on the right side of the engine and remove it to allow air to enter and promote complete drainage. Once the oil has finished draining, close the upper plug. Now, slowly pour the new oil into the upper oil hole, using a funnel to avoid spills. Consult the owner's manual to know the recommended quantity and type of oil for your bike. Check the oil level with the dipstick and add oil, if necessary, up to the indicated level. Finally, dispose of the used oil properly and make sure all plugs are tightly closed. These steps will help you keep your Harley Davidson Street Bob in excellent working condition.

Posted on 25 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Harley-Davidson Street Bob?
How to change the engine oil in the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the motor oil in the Harley-Davidson Street Bob, an extremely simple and quick operation. First of all, we…
How to Change the Engine Oil on Harley Davidson Street Bob
How to Change the Engine Oil on Harley Davidson Street Bob
Street Bob This guide briefly illustrates how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Harley Davidson Str…
How to replace the motor oil in the Harley-Davidson Street Bob?
How to replace the motor oil in the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the engine oil in the Harley-Davidson Street Bob, a very simple and quick operation. First of all, we wait…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos