Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Holden Barina Spark?

Model: Holden Barina Spark MK 1 - Years 2009-2015
Part: Cabin air filter

The cabin air filter is located behind the glove compartment. First, disconnect it by pulling and lifting it upward, first from one side and then from the other, as shown in the video. At this point, remove the filter cover, which is held in place by a latch mechanism. Use a screwdriver to remove the screws that secure the lower plastic of the compartment so you can take it off. Now the cabin air filter is fully accessible, and you can easily pull it out. Insert the new one and reverse the procedure to put everything back in place.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter for the Holden Barina Spark
How to Replace the Cabin Air Filter for the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) This guide shows how to replace the cabin air filter for the Holden Barina Spark. To access the filter compartment, you need to remove the glove box;…
How to Replace the Alternator on the Holden Barina Spark?
How to Replace the Alternator on the Holden Barina Spark?
Holden Barina Spark (2009-2015 / MK 1) To replace the alternator on the Holden Barina Spark, open the hood to access the components inside the engine compartment. You will need to remove a…
How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos