Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we can see how to start a motorcycle that has already experienced the cold problem and therefore has a dead battery. In this case, it is a Honda Transalp, but the method is valid for any motorcycle; only the battery's positioning changes. In this case, it is located under the side panel on the right side of the seat: just remove the three screws that hold it in place, and we have access to the battery. Using a booster that we can find on Amazon with the code B0BZVWMVJT at the price of €36.87 + €9.99 for shipping, we connect the black clamp to the negative terminal, then the red one to the positive terminal, and proceed to start the engine. Now we definitely need to take a nice ride to recharge the battery!

Posted on 8 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Honda Transalp
Replacing the Headlight Bulb on the Honda Transalp
Transalp 650 This brief guide outlines the steps to remove and replace the headlight bulb on the Honda Transalp motorcycle, following the instructions below. Firs…
How to Replace the Fork Gaiters on the Honda Transalp 650
How to Replace the Fork Gaiters on the Honda Transalp 650
Transalp 650 This guide explains the procedure for replacing the fork gaiters on the Honda Transalp 650. The tools required for this job are: hex or star screwdri…
How to Replace the Headlight Bulb of a Honda Transalp 650?
How to Replace the Headlight Bulb of a Honda Transalp 650?
Transalp 650 To replace the headlight bulb of the Honda Transalp 650, loosen the screws securing the trim around the headlight: these screws are located just abov…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos