|
Do it yourself
| |||
| ||||
|
Model: Honda Transalp 650
This brief guide outlines the steps to remove and replace the headlight bulb on the Honda Transalp motorcycle, following the instructions below. First, place your motorcycle on its stand and begin by removing the plastic protective cover located behind the headlamp. Next, disconnect the electrical connector of the bulb and unclip the metal spring to remove the dipped beam bulb, as shown in the video. Now, install the new bulb with the same fitting; reconnect everything and reassemble!
Updated on 17 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Transalp 650
To replace the headlight bulb of the Honda Transalp 650, loosen the screws securing the trim around the headlight: these screws are located just abov…
Transalp 650
To replace the rear brake pads on the Honda Transalp 650, loosen the bolts that secure the caliper to the corresponding disc: once the bolts are loos…
Transalp 650
This guide explains the procedure for replacing the fork gaiters on the Honda Transalp 650. The tools required for this job are: hex or star screwdri…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |