|
Do it yourself
| |||
| ||||
|
Model: Honda Transalp 650
To replace the rear brake pads on the Honda Transalp 650, loosen the bolts that secure the caliper to the corresponding disc: once the bolts are loosened, detach the caliper from its seat to remove the corresponding pin. Once this pin has been removed, you can slide out the pads from their seat: then you can secure the new ones with the pin, repositioning the caliper on the disc to ensure everything is functioning correctly.
Posted on 1 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Transalp 650
To replace the headlight bulb of the Honda Transalp 650, loosen the screws securing the trim around the headlight: these screws are located just abov…
Transalp 650
This brief guide outlines the steps to remove and replace the headlight bulb on the Honda Transalp motorcycle, following the instructions below. Firs…
Transalp 650
This guide explains the procedure for replacing the fork gaiters on the Honda Transalp 650. The tools required for this job are: hex or star screwdri…
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |