Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the headlight bulb of the Honda Transalp 650, loosen the screws securing the trim around the headlight: these screws are located just above the fork and on the sides of the front of the bike. Once these screws are loosened, you can detach the panel to access the screws securing the headlight. By loosening these screws, you can remove the headlight to pull the bulb out from the inside. The new bulb can now be inserted, securing everything with the screws and refitting the fairing panels.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Honda Transalp
Replacing the Headlight Bulb on the Honda Transalp
Transalp 650 This brief guide outlines the steps to remove and replace the headlight bulb on the Honda Transalp motorcycle, following the instructions below. Firs…
How to replace the rear brake pads on the Honda Transalp 650?
How to replace the rear brake pads on the Honda Transalp 650?
Transalp 650 To replace the rear brake pads on the Honda Transalp 650, loosen the bolts that secure the caliper to the corresponding disc: once the bolts are loos…
How to Replace the Fork Gaiters on the Honda Transalp 650
How to Replace the Fork Gaiters on the Honda Transalp 650
Transalp 650 This guide explains the procedure for replacing the fork gaiters on the Honda Transalp 650. The tools required for this job are: hex or star screwdri…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos