Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on a Honda SW

Model: Honda Sw T
Part: Engine oil

Video tutorial

Today, you will see how to change the engine oil on your Honda SW. First, take a container to collect the used oil and place it under the oil drain plug. Unscrew the drain plug and collect the oil in the container (there is a mesh filter in the drain plug; clean it with some petrol).

While the oil is draining, unscrew the filter using a strap wrench and replace it with a new one (before fitting, lubricate the gasket with a bit of oil). Finally, refit the drain plug and add the new oil through the filler cap.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Honda Sw T400
Replacing the Air Filter on a Honda Sw T400
Sw T Replace the original engine air filter on a Honda Sw T400 scooter. Follow this guide to proceed with the replacement. Position the scooter on the cen…
How to Remove the Spark Plug on a Honda SW-T
How to Remove the Spark Plug on a Honda SW-T
Sw T Today, you will learn how to replace the spark plug on your Honda SW-T. First, remove the screws from the plastic cover on the footwell of your scoot…
How to Replace the Front Headlight Bulb in a Honda SW-T 600?
How to Replace the Front Headlight Bulb in a Honda SW-T 600?
Sw T To replace the front headlight bulb in a Honda SW-T 600, access the inside of the front fairing, just below the handlebars of the motorcycle. Here, y…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos