Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Nc 700x
Part: Bearing

Unscrew the front wheel bolts using a 17 mm socket. Using a 12 mm socket, unscrew the bolts of the brake caliper. On the other side, loosen the bolt that secures the pin (also with a 12 mm socket) and unscrew the central bolt with a 17 mm Allen key. Once the wheel is removed (be careful with the bushes), take off the dust covers with a flat screwdriver. Remove the bearings by shifting the inner spacer to one side and tapping as shown in the video, until it comes out of its seat. Remove the inner spacer and proceed with the other bearing. Reverse the process for reassembly.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the Honda NC 700X
How to Replace the Air Filter of the Honda NC 700X
Nc 700x To replace the air filter of the Honda NC 700X, open the glove compartment located at the front of the bike, just behind the handlebars: by opening t…
Instructions for Replacing the Clutch Lever on a Honda NC 700X
Instructions for Replacing the Clutch Lever on a Honda NC 700X
Nc 700x In this video tutorial, you will find instructions to remove and replace the clutch lever on a Honda NC 700X in simple steps. First, remove the rubbe…
Replace the Rear Brake Pads on the Honda NC 700X
Replace the Rear Brake Pads on the Honda NC 700X
Nc 700x In this tutorial video, you will learn how to remove and replace the rear brake pads on the Honda NC 700X motorcycle. First, place the bike on its ce…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos