Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the 2019 Honda CRV remote control

Model: Honda CR-V MK 5 - Years: 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

In this article, we will show you the procedure for replacing the battery of the 2019 Honda CR V remote control. For this operation, we will need a flathead screwdriver.

To replace the battery, the first step is to remove the emergency key. Once the emergency key is removed, use the screwdriver to pry at the bottom of the key to remove the cover and access the battery. Now it will be possible to replace the battery, then reinsert the key cover by pressing with your fingers and then reinsert the emergency key.


Posted on 8 May 2025 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Honda CR-V?
How to reset the "Service" light on a Honda CR-V?
Honda CR-V (2023-2026 / MK 6, RS) To reset the "Service" light on a Honda CR-V, turn on the ignition without starting the engine. Use the controls on the steering wheel to access the …
How do you turn off the tire pressure light in the Honda CRV?
How do you turn off the tire pressure light in the Honda CRV?
Honda CR-V (2017-2022 / MK 5) Noticing the tire pressure warning light in the Honda CRV, and not only, is synonymous with the presence of problems. The most common causes are punc…
How to Replace the Wiper Blade Rubber on a Honda CR-V
How to Replace the Wiper Blade Rubber on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) This tutorial video shows how to replace the rubber of the rear wiper blade on a Honda CR-V by following a few simple steps that will allow you to ma…

    Frequently Asked Questions

    • Cr V 2012-2017 - What does the Honda CR-V wrench warning light mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos