Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2010 Honda Accord

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

If you own a 2010 Honda Accord and are wondering what steps you need to take to complete the manual reset of the engine oil light, then just read the following guide and follow the procedure described. First, go inside the cabin and turn on the instrument panel, then locate the button to the right of the speedometer and hold it down for about ten seconds.

Release it when the display starts flashing, and then hold it down again until the oil light reset is confirmed.


Posted on 20 June 2025 by ScegliAuto


Related tutorials

How to reset the oil light on the 2006 Honda Accord
How to reset the oil light on the 2006 Honda Accord
Honda Accord (2002-2007 / MK 7) To manually reset the engine oil light on the instrument panel display of your 2006 Honda Accord, simply follow the guide below and apply all the ste…
How to Reset the Oil Light on a Honda Accord?
How to Reset the Oil Light on a Honda Accord?
Honda Accord (2002-2007 / MK 7) Looking at the dashboard of the Honda Accord, just to the right of the small central display, you will notice a single button that is used to reset t…
How to Reset the Oil Light on the Honda Accord
How to Reset the Oil Light on the Honda Accord
Honda Accord (2008-2013 / MK 8) If the oil life warning light on the instrument cluster of your Honda Accord (2008-2013) does not turn off automatically after you have changed the o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos