Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on Honda Accord

Model: Honda Accord MK 10 - Years: 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle with a suitable jack and access the area under the engine. Locate the two metal panels secured with screws and remove them to access the engine.

At this point, both the oil filter and the drain plug are visible. Before unscrewing the plug and the filter, open the oil filler cap located on top of the engine head.

Using a 17 mm socket, proceed to unscrew the oil drain plug, ensuring you have placed a container on the floor to collect the used oil. Next, loosen the oil filter by hand and unscrew it completely along with the drain plug. Wait a few minutes for all the oil to drain out. After that, install the new oil filter by hand and reattach the drain plug.

Then, fill with oil suitable for the engine type and check the correct oil level using the dipstick (the level should be between the minimum and maximum). Finally, reattach the two plates under the engine.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Changing the Oil Filter and Engine Oil in a Honda Accord
Changing the Oil Filter and Engine Oil in a Honda Accord
Honda Accord (2002-2007 / MK 7) As you should do every time you want to perform maintenance on a car, place your Honda Accord in a stable and secure position, either on a ramp or on…
How to Change the Engine Oil of the Honda Accord
How to Change the Engine Oil of the Honda Accord
Honda Accord (2002-2007 / MK 7) To change the engine oil of the Honda Accord, loosen the drain plug located at the bottom of the car. Unscrewing this plug will allow the used oil to…
How to change the wiper blades on the Honda Accord?
How to change the wiper blades on the Honda Accord?
Honda Accord (2002-2007 / MK 7) After a certain period, the wiper blades become too worn to perform their function correctly. When you notice that the windscreen does not remain per…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos