Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A simple solution to remove water from the headlights of our car.

Model: Honda Honda Various
Part: Headlight

Video tutorial

In this video we see the simplest method to remove the water that has accumulated inside the headlights of our car. In this case it is a Honda vehicle, but clearly the system is valid for every brand and every model. We need to take a drill, and get the smallest and thinnest tip we have in our kit. We disassemble - or at least loosen - the front bumper in order to reach the lowest part of the headlight and then make a small hole right in that area, which will then be covered by the bumper.

Let all the water drain out: the small hole will also allow enough air to prevent condensation from forming. Check periodically that it does not get clogged, and the job is done.


Posted on 25 June 2025 by ScegliAuto


Related tutorials

How to Remove the Steering Lock on a Honda
How to Remove the Steering Lock on a Honda
Honda Honda Various If you have encountered a serious issue with the steering lock system on your car, do not worry as the solution exists and it is simpler than you mig…
How to correctly use fog lights on a car
How to correctly use fog lights on a car
Honda Honda Various Are we sure we know how to correctly use the fog lights of our car? Let's see how the youtuber explains his tips from a Honda car, but of course they…
How to Retrieve and Enter the Unlock Code for a Honda Car Radio?
How to Retrieve and Enter the Unlock Code for a Honda Car Radio?
Honda Honda Various In this tutorial, you will see how to retrieve and enter the unlock code for an older generation Honda car radio, a very simple and quick operation. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos