Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Lock on a Honda

Model: Honda Honda Various

Video tutorial

If you have encountered a serious issue with the steering lock system on your car, do not worry as the solution exists and it is simpler than you might think. First, ensure the car is turned off, then go to the driver's side and remove all the screws located under the steering wheel.

Do the same with the screw found to the left of the right steering lever. At this point, remove the upper and lower covers of the steering wheel by pulling them towards you. Next, unscrew the screws that secure the starter motor and disconnect the green connector.

You can now proceed with replacing the entire component.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Program a New Remote for a Honda?
How to Program a New Remote for a Honda?
Honda Honda Various In this tutorial, you will see how to program a new remote for a Honda, a very simple and quick operation. To do this, you will obviously need the re…
How Does the Smart Key Work on the Honda SH 300i?
How Does the Smart Key Work on the Honda SH 300i?
Honda Honda Various The Smart Key for the Honda SH 300i works from up to two metres away from the scooter and allows you to unlock the seat to access the helmet compartm…
How to Manually Open the Seat of the Honda SH 150
How to Manually Open the Seat of the Honda SH 150
Honda Honda Various If you need to manually open the seat of your scooter when the battery is flat or the remote control is not working, follow the instructions below an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos