Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Honda CR-V 2.4L

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Starter motor

Below are the instructions to remove and replace the starter motor on a Honda CR-V 2.4L. First, open the vehicle's bonnet and begin by removing the battery, disconnecting both terminals; then remove the intake hose and subsequently the throttle body, as shown in the video. Next, from underneath, unscrew the bolts of the starter motor, disconnecting the electrical wiring to remove it; repair or replace the component with a new original part.

Posted on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from a Honda CR-V
How to Remove the Starter Motor from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Let's see how to remove a starter motor from a Honda CR-V. First, use a socket wrench to disconnect the battery power cables, then lift the car on a …
How to Remove the Windscreen Wiper Motor from a Honda CR-V
How to Remove the Windscreen Wiper Motor from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is your windscreen wiper not working anymore? Follow this guide to remove the front wiper motor from a Honda. Pull the plastic lever located at the b…
How to Remove the Driver's Window Regulator Motor on Honda CR-V
How to Remove the Driver's Window Regulator Motor on Honda CR-V
Honda CR-V (2012-2017 / MK 4) Using a plastic wedge, remove the upper casing by prying it in the gap and then disconnect the connector. With a small flathead screwdriver, remove t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos