Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Honda remote battery

Model: Honda Honda Various
Part: Key

Today we will explain how to replace the battery of the Honda remote control. The battery we will use is a Panasonic CR 2032 model with three volts. To replace the battery, we need to remove the cover of the remote control. To do this, we can use a flat-head screwdriver. Insert the screwdriver along the side and apply slight pressure outwards to remove the cover. Remove the old battery and insert the new one. Once the cover is closed, we just need to go near the vehicle to test the remote control by pressing the vehicle's lock and unlock buttons.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Honda Clarity remote control.
How to replace the battery of a Honda Clarity remote control.
Honda Honda Various In this video tutorial, we are shown how to replace the battery of the key remote for a Honda Clarity car. The operation is very simple: we take the …
How to replace the battery of Honda vehicle remote control
How to replace the battery of Honda vehicle remote control
Honda Honda Various When the key of a vehicle stops working, the cause could be the remote control battery not functioning, in these cases it is necessary to replace it.…
How to replace the battery of Honda vehicle keys
How to replace the battery of Honda vehicle keys
Honda Honda Various The following video tutorial illustrates the steps to replace the battery in the car remote for Honda vehicles. Before replacing the battery, make su…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos