Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Do we know where to look if water enters our car?

Model: Honda Fit GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

In this video, we see which places to look at if water infiltrates our car. In fact, it is a very unpleasant inconvenience that is not easy to locate. The car in the video is a Honda Fit, but the model is not crucial.

Before opening the hood, we remove the windshield wipers, and then the grille at the base of the windshield. We remove the driver's seat, because the carpet needs to be lifted, as it is all wet. We also remove the door seal and the door sill, and finally the mat and the carpet.

The youtuber discovers that underneath there is a poorly done repair, which is evidently responsible for the leak; in fact, in the lower part of the bodywork, right at that point, there is a hole with a bad repair. Everything is removed and brought back to its original condition, then the hole is welded and sealed both from the inside and the outside.


Posted on 19 July 2025 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on a Honda Fit
How to Reset the Tire Pressure Light on a Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) In this article, you will find the procedure to reset the tire pressure light on a Honda Fit if it does not reset automatically. After checking the t…
Where to Find the Fuse Box in a Honda Fit
Where to Find the Fuse Box in a Honda Fit
Honda Fit (2007-2012 / GE) If you want to find out exactly where the fuse box is located in your Honda Fit, just carefully read the instructions in this mini guide and then put…
Where to Find the Fuse Box in a Honda Fit
Where to Find the Fuse Box in a Honda Fit
Honda Fit (2007-2012 / GE) If you own a Honda Fit and want to find out where the fuse box is located so you can address any electrical issues, just read this guide carefully an…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos