Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the Honda Jazz 2?

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Fuse box

In the following guide, you will find the description of the entire procedure you need to follow to locate the fuse box of your second-generation Honda Jazz. First, make sure that you have completely turned off the car, then lift the front hood to have clear access to the engine compartment and locate the fuse box on the right side. Next, remove the cover of the fuse box, and you will finally have access to the fuses. To work on them, first disconnect the car battery for safety reasons, and you are done.

Posted on 24 December 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Quale è lo schema dei fusibili della Honda Jazz?
Quale è lo schema dei fusibili della Honda Jazz?
Honda Jazz (2008-2013 / MK 2) In this video, we can see where the fuse box of the Honda Jazz is located and what the corresponding diagram is, useful in case we need to check the …
Where to Find the OBD Port on the 2018 Honda Jazz
Where to Find the OBD Port on the 2018 Honda Jazz
Honda Jazz (2013-2019 / MK 3) If you intend to connect to the ECU of your Honda Jazz third generation (2018), but do not know where the OBD port is located to connect the diagnost…
Where are the fuses located in the Honda Jazz?
Where are the fuses located in the Honda Jazz?
Honda Jazz (2013-2019 / MK 3) The fuses in the Honda Jazz are contained within the dedicated fuse boxes present in the vehicle: in this type of car, you can find two boxes for con…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos