Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Roof Bars

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Roof rack bars

See other generations:
Video tutorial

The vehicle is already pre-equipped for installing roof bars, so you need to obtain the appropriate roof bars for the model of car they will be installed on. First, remove the eight plastic caps that hide the threaded nuts. Position the two bars on the roof in line with the fixing holes, then screw in the eight fixing screws without tightening them.

Now, carefully tighten the screws, checking a second time to ensure they are all perfectly tightened. It is good practice not to overload the roof bars and to keep the dimensions within legal limits.


Updated on 31 January 2026 by ScegliAuto


Related tutorials

Installing Roof Bars
Honda CR-V (2007-2012 / MK 3) Along the side edges of the car roof, there are two rubber strips containing rectangular caps that need to be removed: beneath the caps are the capti…
Installing Car Mats
Installing Car Mats
Honda CR-V (2002-2007 / MK 2) The operation described in the following guide takes about 6 minutes and is of easy difficulty. Installing car mats protects the floor of your car fr…
Installation of Rubber Boot Mat
Installation of Rubber Boot Mat
Honda CR-V (2002-2007 / MK 2) This video illustrates how to correctly install a rubber boot mat for your vehicle. If you are concerned about dirtying or damaging the carpet in you…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos