Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning on a Honda CR-V MK6

Model: Honda CR-V MK 6, RS - Years: 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning on a Honda CR-V MK6, first ensure that all tyres are inflated to the correct pressure: 35 PSI front (2.41 bar) and 32 PSI rear (2.21 bar) as indicated on the door sill. Check each wheel with a gauge and adjust if necessary.

Once the pressure is verified, sit in the driver's seat and turn on the ignition (without starting the engine). On the central display, select "Vehicle Settings". Scroll to "TPMS Calibration" and press the confirm button.

Select "Calibrate" and confirm. The display will show the message "Calibration started". The system will take a few minutes to complete the calibration and the warning light will turn off. Remember that tyre pressure varies with temperature, so check it regularly.


Posted on 17 July 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Honda CR-V?
How do you reset the tire pressure light on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The tire pressure warning light shown on the instrument panel of the Honda CR-V can be reset by inflating the tires until they reach the correct pres…
How to Reset the Tyre Pressure Warning Light on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) Reset the tyre pressure warning light on the Honda CR-V by inflating all tyres to the corresponding pressure value: this value is indicated on the st…
How to Reset the Tyre Pressure Warning on the Honda CR-V
How to Reset the Tyre Pressure Warning on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) These brief and simple steps will allow you to reset the tyre pressure warning on the Honda CR-V. Before recalibrating the TPMS sensors, ensure all f…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos