Do it yourself
Frequently asked questions about cars and motorcycles

How to Eliminate the Annoying Ignition Beep

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Control unit

See other generations:
This video is currently unavailable

If you own a Honda Civic, this guide will be useful as it illustrates the procedure to eliminate the noise caused by the "beep" that occurs when the key is placed in the ignition switch in the "on" position. First, access the black box located behind the panel on the left side of the steering wheel.

To do this, remove the two 10 mm bolts securing the panel. Once you locate the black box, extract it by unscrewing the screws that hold it in place.

Open the box by disengaging the closing clips. Remove the circuit board using the tip of a small flat screwdriver.

Now, you need to extract the black circular piece located at one corner of the circuit board (responsible for the noise we want to eliminate). To do this, you will need to desolder the two clips that hold it from the back of the board.

Once this small piece is removed, you will no longer hear the annoying and prolonged "beep" when starting your vehicle.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Honda Civic (2001-2006 / MK 7) Need to remove the starter motor from the car? Here’s how to do it on a Honda Civic. Before removing the part from the engine bay, disconnect the bat…
Honda Civic (2006-2012 / MK 8) Before starting, disconnect the battery of your Honda Civic to work safely. Begin by lifting the front of the car. Next, unscrew and remove the bolts…
Honda Civic (2012-2015 / MK 9) In this tutorial, you will see how to replace the starter motor on a Honda Civic, a simple operation but one that requires good manual skills. First,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos