Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor on a Honda Civic?

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Starter motor

See other generations:
Video tutorial

In this tutorial, you will see how to replace the starter motor on a Honda Civic, a simple operation but one that requires good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely.

Next, lift the front of the vehicle, go underneath the engine, and disconnect the indicated part of the exhaust pipe. At this point, unscrew the bolts securing the starter motor, disconnect the power terminals, and separate it from the support.

To install the new part, simply follow the reverse procedure.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Honda Civic
How to Replace the Starter Motor on a Honda Civic
Honda Civic (2006-2012 / MK 8) Before starting, disconnect the battery of your Honda Civic to work safely. Begin by lifting the front of the car. Next, unscrew and remove the bolts…
How to Remove the Starter Motor from a Honda Civic
How to Remove the Starter Motor from a Honda Civic
Honda Civic (2001-2006 / MK 7) Need to remove the starter motor from the car? Here’s how to do it on a Honda Civic. Before removing the part from the engine bay, disconnect the bat…
How to Replace the Starter Motor of the Honda Civic
How to Replace the Starter Motor of the Honda Civic
Honda Civic (2001-2006 / MK 7) This guide will show you how to remove and replace the starter motor of the Honda Civic, following the instructions below. First, open the bonnet and…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos