Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor Brushes on a Honda Civic?

Model: Honda Civic MK 5 - Years 1992-1995
Part: Starter motor

In this detailed tutorial, learn how to replace the starter motor brushes on a Honda Civic EG. This is a delicate but relatively simple operation if you carefully follow all the steps. First, to remove the starter motor, take off the intake manifold, then disconnect the two terminals of the solenoid and unscrew the mounting bolts of the motor. Once removed, take out all the indicated screws and bolts, open it up, and extract the rotor. At this point, remove the brushes from the housing, clean any dirt residue, and proceed with the replacement. You can purchase individual brushes to solder or the entire unit, which is definitely recommended to simplify the job.

Updated on 18 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Starter Motor from a Honda Civic
How to Remove the Starter Motor from a Honda Civic
Honda Civic (2001-2006 / MK 7) Need to remove the starter motor from the car? Here’s how to do it on a Honda Civic. Before removing the part from the engine bay, disconnect the bat…
How to Replace the Starter Motor of the Honda Civic
How to Replace the Starter Motor of the Honda Civic
Honda Civic (2001-2006 / MK 7) This guide will show you how to remove and replace the starter motor of the Honda Civic, following the instructions below. First, open the bonnet and…
How to Replace the Starter Motor on a Honda Civic
How to Replace the Starter Motor on a Honda Civic
Honda Civic (2006-2012 / MK 8) Before starting, disconnect the battery of your Honda Civic to work safely. Begin by lifting the front of the car. Next, unscrew and remove the bolts…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos