Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : Replace the Honda Civic starter motor

Honda Civic - Video tutorial

Model: Honda Civic MK 7 - Years 2001-2006
Part: Starter motor
Operation: Replace the Honda Civic starter motor

Let's find out in this guide how to disassemble and replace the starter motor of the Honda Civic, following the instructions below. First we open the engine hood and start by removing our intake duct; to do this, unscrew all the fixing nuts and disconnect all the pipes on the top, as shown in the video. At this point we find our starter motor below; disconnect the power supply connector and unscrew the screws to remove it from its seat. Now let's replace it with the new one, with the original spare!


Posted on 19 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos