Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Honda CR-V Gearbox Oil Replacement

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Transmission fluid

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the automatic gearbox oil in a Honda CR-V, following the video tutorial and the instructions below. First, lift the vehicle and remove the oil drain bolt, allowing it to drain into a container; once done, screw the bolt back in and insert the new gearbox oil through the designated hole in the engine bay on the right.

At this point, raise the dipstick and pour in the oil, continuously checking the level and filling to the maximum; then start the engine and begin engaging the gears.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Changing the Gearbox Oil on the Honda CR-V
Changing the Gearbox Oil on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) .. and replacing the automatic gearbox oil on the Honda CR-V. First, raise the vehicle and start unscrewing the oil drain bolt located near the exhaust.. …
Automatic Gearbox Oil Replacement
Automatic Gearbox Oil Replacement
Honda CR-V (2002-2007 / MK 2) Once the vehicle is raised on the ramp, remove the protective cover and unscrew the drain plug from the gearbox located at the rear; after draining t…
Differential Oil Replacement on Honda CR-V
Differential Oil Replacement on Honda CR-V
Honda CR-V (2012-2017 / MK 4) .. How to replace the differential oil on a Honda CR-V? Lift the vehicle on a column lift and locate the differential, then remove the bolt on the.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos