Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic Gearbox Oil Replacement

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Drivetrain

See other generations:
Video tutorial

Once the vehicle is raised on the ramp, remove the protective cover and unscrew the drain plug from the gearbox located at the rear; after draining the oil, refit the plug after cleaning it thoroughly. To refill, access the engine bay: just below the battery is the cap with the dipstick through which to refill with new oil using a funnel with a tube.

Carefully check the level until it reaches the maximum level mark, ensuring not to exceed it.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Honda CR-V Gearbox Oil Replacement
Honda CR-V Gearbox Oil Replacement
Honda CR-V (2002-2007 / MK 2) In this video tutorial, you will learn how to replace the automatic gearbox oil in a Honda CR-V, following the video tutorial and the instructions be…
Changing the Gearbox Oil on the Honda CR-V
Changing the Gearbox Oil on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) This brief and simple guide provides instructions for draining and replacing the automatic gearbox oil on the Honda CR-V. First, raise the vehicle an…
Gear Knob Replacement
Gear Knob Replacement
Honda CR-V (2007-2012 / MK 3) If you want to replace the leather gear knob of a Honda CR-V, here are the instructions. Turn the key to "ON" and keep the handbrake pulled or use th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos