Do it yourself
Frequently asked questions about cars and motorcycles

Gear Knob Replacement

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Shift knob

If you want to replace the leather gear knob of a Honda CR-V, here are the instructions. Turn the key to "ON" and keep the handbrake pulled or use the shift lock release button. Position the gear lever in first gear. Using a plastic spatula, remove the knob cover, then with a star screwdriver, unscrew the two screws. At this point, detach the switch that is attached to both the upper and lower parts of the knob. Extract the knob by sliding it upwards and then disconnect the cable. Now replace the old knob with the new one. Reuse the button and spring from the replaced knob by inserting them into the new one. You can now reassemble the gear lever by performing the reverse operations of disassembly.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2007-2012 / MK 3) To replace the gear knob on the Honda CR-V, you need to detach the front part of the gear knob by prying it off with a thin object. Once this cover i…
Honda CR-V (2012-2017 / MK 4) You can purchase an aftermarket gear shift cover complete with a knob, made of leather with coloured stitching. The disassembly is quite straightforw…
Honda CR-V (2007-2012 / MK 3) Today, you will learn how to reset the service light on a 2008 Honda CR-V. Start the ignition and press the knob on the odometer; by pressing the kno…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos