Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Pollen Filter

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

See other generations:
Video tutorial

The pollen filters purify the air inside the cabin and are located under the passenger side glove compartment. Obtain pollen filters of the same model identical to the originals, then to access removal, unclip the glove compartment door on the passenger side.

Next, remove the clips from the cover panel to take it off. Once the filter cover is removed, simply pull it outwards, carefully removing the filters to avoid dispersing dust inside the cabin. To do this, place a cloth on the floor to catch any dirt.

Clean the inside of the filter housing thoroughly with a vacuum cleaner equipped with a filter, then carefully reinsert the new filters into the housing and close the cover.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Honda Accord
How to Replace the Pollen Filter on a Honda Accord
Honda Accord (2008-2013 / MK 8) In this video tutorial, see how to replace the pollen filter on a Honda Accord. (The filter replacement should be done after 9,000 miles driven). The…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Honda Accord (1998-2002 / MK 6) Especially in summer and spring, it is always best to have the cabin air filter in perfect working order to prevent any debris from entering the cabi…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Honda Accord (2008-2013 / MK 8) The cabin air filter is located on the passenger side, behind the glove compartment: it is necessary to unclip the glove compartment door by pressing…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos