Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Diesel fuel filter

See other generations:
This video is currently unavailable

The diesel filter is located at the rear right of the engine bay, just below the windscreen; once you have disconnected the connectors of the relevant sensors and the inlet and outlet pipes from the filter, you can remove it along with its support. Once on the workbench, proceed with the replacement of the filter by first unscrewing the lower cap with the sensor, which will need to be fitted to the new filter, and then the filter itself from the support.

Once the new filter and cap are fitted to the support, install everything back in the vehicle by reconnecting the connectors and pipes. Finally, before starting the engine, fill the filter using the manual pump.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Honda Accord Mk5
How to Replace the Fuel Filter on a Honda Accord Mk5
Honda Accord (1993-1998 / MK 5) This guide shows how to replace the fuel filter on a Honda Accord Mk5. This component is located on the right side of the engine bay. Using a 19 mm a…
Engine Air Filter Replacement
Engine Air Filter Replacement
Honda Accord (2002-2007 / MK 7) The air filter prolongs the life of a car's engine by ensuring proper operation. When the air filter is worn, it compromises the air/fuel ratio. The …
How to replace the fuel filter in the Honda Accord?
How to replace the fuel filter in the Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial, we can see how to replace the fuel filter in the Honda Accord, a very simple and quick operation. First of all, we open the tank ca…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos