Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulb on a Honda CR-V, open the boot to access the screws securing the headlamp next to the seal. Loosen these screws to extract the headlamp from its housing, allowing you to remove the bulbs from the back by disconnecting them from the connectors.

Connect the new bulbs and insert them back into the headlamp. Finally, refit the headlamp by tightening the screws next to the seal.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Honda CR-V?
How to Replace the Rear Light Bulb on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the rear light bulb on the Honda CR-V, open the tailgate of the boot and remove the protective caps of the screws located between the seal…
How to replace the headlight bulb of the Honda CR-V?
How to replace the headlight bulb of the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…
How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos