Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Wheel Locking Bolts

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Accessory kit

See other generations:
Video tutorial

One way to prevent thieves from removing your car wheels to steal them is to install a locking bolt: a great way to deter even the most persistent thieves. First, you need to purchase (from a car parts centre or online) the appropriate locking bolt for your car's wheels (diameter, pitch, and thread length): this is a special bolt that replaces the traditional bolts that secure the wheel to the hub, but with a uniquely shaped head that can only be grasped with the specific key provided with the bolts.

You can choose to replace just one bolt per wheel or all the bolts. If you decide to apply just one bolt per wheel, it is not necessary to lift the vehicle; you can proceed by unscrewing the bolt and replacing it with the locking one; using the appropriate key, ensure that the bolts are tightly secured.

Finally, repeat the process for the other three wheels. Do not forget to keep the key for unscrewing the locking bolts and store it in a safe place, even in the boot of the car along with the warning triangle.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Installation of Illuminated Sill Strips
Installation of Illuminated Sill Strips
Honda Accord (2008-2013 / MK 8) Installing illuminated sill strips along the inner edge of the door sill will give the vehicle a striking appearance: the operation is very simple an…
Installation of Shaped Boot Mat
Installation of Shaped Boot Mat
Honda Accord (2002-2007 / MK 7) Applying a shaped mat inside the boot is a smart choice because these mats have a raised edge that helps contain any liquid spills, preserving the or…
Installation of LED Courtesy Lights
Honda Accord (2008-2013 / MK 8) If you intend to install LED lights in the footwell area, follow these useful tips: only carry out the installation yourself if you have a good basic…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos