Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Illuminated Sill Strips

Model: Honda Accord MK 8 - Years 2008-2013
Part: Accessory kit

Installing illuminated sill strips along the inner edge of the door sill will give the vehicle a striking appearance: the operation is very simple and does not require any modifications to the bodywork as the strips come with double-sided tape. However, since these strips are illuminated, you need to run power cables to the locations of the four doors: for this reason, disconnect the plastic cover inside the sill strips and run a power cable from the fuse box, specifically tapping into the power supply for the interior lights.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cleaning and Replacing the Engine Air Filter
Cleaning and Replacing the Engine Air Filter
Honda Accord (2008-2013 / MK 8) Cleaning and replacing the engine air filter is an aspect that should not be overlooked to maintain high performance in your car. Cleaning and mainte…
Fog Light Installation
Fog Light Installation
Honda Accord (2008-2013 / MK 8) Open the front bonnet, remove the plastic cover on the grille, and then the air ducts connected to the bumper grilles where the fog lights will be in…
Installation of Shaped Boot Mat
Installation of Shaped Boot Mat
Honda Accord (2002-2007 / MK 7) Applying a shaped mat inside the boot is a smart choice because these mats have a raised edge that helps contain any liquid spills, preserving the or…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos