Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wishbone on a Honda Insight?

Model: Honda Honda Various
Part: Control arm

To replace the wishbone on a Honda Insight, lift the car and loosen the bolts securing the wheel corresponding to the wishbone that needs replacing. Next, remove the rivets securing the inner wheel arch cover, located underneath the car and inside the wheel arch. At this point, you can loosen all the bolts securing the wishbone and remove it from its housing, securing the mechanism. The new wishbone can then be installed and secured to the wheel by inserting the previously removed bolts.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Honda Various In this video tutorial, you will learn how to remove and replace the original radio in a Honda Insight from 2010 to 2014. First, get inside the vehic…
Honda Honda Various As shown in the video, you will replace a shorter windscreen with a taller one on the Honda SH 300. The operation is very simple and will take only a…
Honda Honda Various To replace the climate control bulbs on the Honda Odyssey, open the upper glove compartment located on the passenger side. This will allow you to lev…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos