Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Create a Pocket to Hide Your Personal Effects

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

If you want to protect your personal effects from prying eyes, use a cover in the boot. Here’s how to do it on a Honda Civic.

Open the boot and, using a ruler, mark the points where you will make a hole with a small screwdriver on the back of the seat; in these holes, the cavities of the press button will be inserted and screwed in. Maintaining symmetry, repeat this operation six times (three studs per seat).

Install a clip on each side of the tailgate and attach the load cover cables.

Attach the cover to the back of the seat. The hiding place is created.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Procedure for Replacing Spark Plugs
Procedure for Replacing Spark Plugs
Honda Civic (2001-2006 / MK 7) This tutorial explains how to replace the spark plugs on a Honda Civic. First, ensure that the operations are carried out with the engine completely …
How to Replace the Door Handle
How to Replace the Door Handle
Honda Civic (1992-1995 / MK 5) Obtain the replacement handle and ensure it functions correctly. Open the door and remove the corresponding internal panel by prying it from the open…
How to Reset the Tyre Pressure on the 2006 Honda Civic
How to Reset the Tyre Pressure on the 2006 Honda Civic
Honda Civic (2006-2012 / MK 8) In this video, you will see how to reset the TPMS light on the 2006 Honda Civic. To enter the menu, use the button located on the right side of the s…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos