Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Courtesy Lights on a Honda HR-V

Model: Honda Vezel Hr V MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the courtesy lights on a Honda HR-V, use a screwdriver to pry open the side areas of the light fixture that contains the bulbs. Once the fixture is released, you can pull it out from its housing by disconnecting the connectors at the back.

After the fixture is freed, open it to replace the bulbs inside. After replacing the bulbs, reconnect the fixture by snapping it back into its place.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Activate the CTBA on the Honda HR-V?
How to Activate the CTBA on the Honda HR-V?
Honda Vezel Hr V (2013-2020 / MK 2) The CTBA (City Brake Active) is the automatic low-speed braking system designed to prevent minor collisions installed on Honda vehicles. To deactivat…
How to Replace the Remote Battery for the Honda HR-V?
How to Replace the Remote Battery for the Honda HR-V?
Honda Vezel Hr V (2021-2026 / MK 3) In this tutorial, you will learn how to replace the remote battery for the Honda HR-V, a very simple and inexpensive task. Before you begin, obtain a…
How to Replace the Radio on the Honda Vezel HR-V?
How to Replace the Radio on the Honda Vezel HR-V?
Honda Vezel Hr V (2021-2026 / MK 3) To replace the radio on the Honda Vezel HR-V, open the glove compartment located on the passenger side to detach the trim above the compartment. This…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos