Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Bulbs on a Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: License plate light

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the number plate bulbs on a Honda CR-V, following the instructions below. First, open the rear tailgate and start by removing the small plastic light cover for the number plate light, using something thin to unclip it; then disconnect the electrical connector of the light to remove the small bulb, as shown in the video.

At this point, install the new bulb into the light cover, reassemble it, and reconnect the electrical connector, following the video to the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Replacement of the license plate lights of the Honda CR-V
Replacement of the license plate lights of the Honda CR-V
Honda CR-V (2002-2007 / MK 2) Let's discover the information that will allow us to disassemble and replace the license plate bulbs of the Honda CR-V. First of all, let's move to t…
How to install the license plate holder and license plate on the Honda CR-V
How to install the license plate holder and license plate on the Honda CR-V
Honda CR-V (2023-2026 / MK 6, RS) Let's briefly see the instructions that will allow us to install the license plate holder and the license plate on the Honda CR-V. First of all, let'…
How do you replace the license plate light bulb on the Honda CR-V?
How do you replace the license plate light bulb on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the license plate light bulb of the Honda CR-V, you need to use an object to pry off the light fixture located directly above the license …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos