Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Mirror on a Honda Jazz?

Model: Honda Jazz MK 3 - Years 2013-2019
Part: Side mirror

Replacing the external rear-view mirror on a Honda Jazz is very simple, but first, you need to remove the inner door panel. As shown in the attached tutorial, once the panel is removed, first disconnect the power connector for the adjustment motor. Next, locate the three bolts securing the mirror to the door, positioned inside the indicated holes, and unscrew them with a 10 mm socket. Be careful not to drop them inside the door, as retrieval can be difficult. Fitting the mirror will be just as easy; simply follow the same steps in reverse.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the external rearview mirror of the Honda Jazz?
How do you replace the external rearview mirror of the Honda Jazz?
Honda Jazz (2001-2008 / MK 1) In order to replace the external rearview mirror of the Honda Jazz, you need to use a tool to pry off the trim located in the center of the door pane…
Removing the External Wing Mirror on Honda Jazz
Removing the External Wing Mirror on Honda Jazz
Honda Jazz (2001-2008 / MK 1) In this guide, you will learn how to remove the external wing mirror of a first-generation Honda Jazz in simple steps. First, remove the door panel b…
Where to Find the OBD Port on the 2018 Honda Jazz
Where to Find the OBD Port on the 2018 Honda Jazz
Honda Jazz (2013-2019 / MK 3) If you intend to connect to the ECU of your Honda Jazz third generation (2018), but do not know where the OBD port is located to connect the diagnost…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos