Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Door Panel

Model: Honda Civic MK 7 - Years 2001-2006
Part: Door trim panel

First, remove the triangular plastic trim located by the external rear-view mirror; then, remove the protective cap over the screw inside the opening lever housing and the trim of the internal handle, beneath which there are two screws securing the panel. Next, unscrew the panel securing screws, disconnect the internal opening lever by releasing its cable, pry along the edges to disengage the clips, and pull the panel upwards to remove it from the window seal. Reverse the process for installation.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Panel and Handle on Honda Civic
Removing Door Panel and Handle on Honda Civic
Honda Civic (2016-2021 / MK 10) The great thing about the Honda Civic is that to remove the door panel, there is only one fixing screw to remove, whereas usually there are many arou…
Removing Rear Door Panel on Honda Civic 2016
Removing Rear Door Panel on Honda Civic 2016
Honda Civic (2016-2021 / MK 10) Today, in this video tutorial, you will see how to remove the rear door panel on a 2016 Honda Civic. First, open the rear door and remove the triangu…
How to Replace the Front Wheel Bearing on the Honda Civic
How to Replace the Front Wheel Bearing on the Honda Civic
Honda Civic (2001-2006 / MK 7) Here are step-by-step instructions to remove and replace the front wheel bearing on the Honda Civic. First, raise the vehicle and remove the front wh…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos