Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Column on the Honda Accord?

Model: Honda Accord MK 7 - Years 2002-2007
Part: Checks and maintenance

In this tutorial, see how to remove the steering column on the Honda Accord, a task that may seem difficult but is actually quite simple. First, remove the lower dashboard on the driver's side by unscrewing the single fixing screw, then also remove the secondary panel and the lower cover of the column. Next, disconnect the clips from the steering wheel cables, which do not need to be removed, and unscrew the two pairs of upper bolts and nuts. Finally, remove the two lower bolts previously freed from the cover and extract the steering column.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ignition Switch on a Honda Accord?
How to Replace the Ignition Switch on a Honda Accord?
Honda Accord (1993-1998 / MK 5) To replace the ignition switch on a Honda Accord, loosen the screws securing the panels around the steering column. Once these screws are loosened, r…
Where Are the Fuses of the Honda Accord Located?
Where Are the Fuses of the Honda Accord Located?
Honda Accord (2012-2017 / MK 9) The fuses of the Honda Accord are located inside two fuse boxes within the car: one is in the cabin and the other is in the engine bay. The first is …
How to Replace the Ignition Switch on a Honda Accord
How to Replace the Ignition Switch on a Honda Accord
Honda Accord (1993-1998 / MK 5) In this video, see how to replace the ignition switch on a Honda Accord MK5, which has the issue of shutting down randomly. In this case, the problem…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos