Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light in a Honda SH 125

Model: Honda Honda Various
Part: Service warning light

This video also demonstrates how to change the oil in addition to resetting the warning light for a Honda SH 125 scooter. As shown, simply drain the oil sump by unscrewing the drain bolt and placing a container to catch the used oil. Once the oil has finished draining, re-screw the bolt to close the oil sump. Refill with new oil and re-screw the cap. Now, press the button located at the bottom right of the speedometer for about ten seconds, then turn the key to switch on the ignition, and the "Oil Change" light will be turned off.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on the Honda SH 150
How to Reset the Oil Warning Light on the Honda SH 150
Honda Honda Various Use the key to turn on the instrument panel of the SH 125. Turn on the instrument panel with the key (do not start the engine). When the instrument p…
How to Reset the Service Light on the Honda SH 150
How to Reset the Service Light on the Honda SH 150
Honda Honda Various After performing the service that includes changing the engine oil and filter on this scooter, you need to reset the oil change warning light that ha…
How do you reset the Service light on the Honda Forza?
How do you reset the Service light on the Honda Forza?
Honda Honda Various The mentioned moped has a certain mileage and time autonomy, after which the Service light turns on to remind you to change the motor oil and all oth…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos