Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Honda Civic

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

Below are the instructions that will allow you to reset the tyre pressure warning light on the Honda Civic; before performing the TPMS reset, ensure that all four tyres are at the correct operating pressure. Then, get in the car and turn on the ignition; go to the vehicle settings from the central display, and then to the tyre pressure option, proceeding to reset it as illustrated in the video.

Finally, turn off the ignition and wait about ten seconds before turning everything back on!


Updated on 29 June 2026 by ScegliAuto


Related tutorials

Resetting Tyre Pressure Light on Honda Civic
Resetting Tyre Pressure Light on Honda Civic
Honda Civic (2012-2015 / MK 9) Today we will see how to reset the tyre pressure light on a Honda Civic from 2012 to 2019. Before performing the reset operation, it is necessary to …
How to Reset the Tyre Pressure Warning Light on the Honda Civic?
How to Reset the Tyre Pressure Warning Light on the Honda Civic?
Honda Civic (2016-2021 / MK 10) You can completely clear the tyre pressure warning light on the Honda Civic by inflating the tyres to the optimal pressure value: this value is indic…
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Honda Civic MK10
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Honda Civic MK10
Honda Civic (2016-2021 / MK 10) In this short video, you will see how to reset the tyre pressure monitoring system light on the tenth generation Honda Civic in simple and quick step…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos