Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Honda HR-V

Model: Honda Hr V RU, MK 2 - Years 2016-2022
Part: Tire pressure warning light

Follow the steps below to reset the tyre pressure warning light on the Honda HR-V. First, get inside the vehicle and turn on the ignition by pressing the start button. Then, press and hold the TPMS button located at the bottom left on the driver's side until the warning light starts flashing on the instrument panel and then turns off completely, as shown in the video. Remember that you can only reset the tyre pressure warning light if the tyres are at the correct operating pressure!

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Honda HR-V
How to reset the tire pressure light on the Honda HR-V
Honda Hr V (2021-2026 / RV4, RV3, RV6, RV5) Today we will learn how to reset the tire pressure warning light (TPMS) on the Honda HR-V; before performing the reset, it is necessary that all four…
Resetting the tire pressure warning of the Honda HR-V
Resetting the tire pressure warning of the Honda HR-V
Honda Hr V (2016-2022 / RU, MK 2) Today we will learn how to reset the tire pressure warning on the Honda HR-V; before performing the reset and recalibration of the TPMS sensors, it i…
How do you reset the tire pressure warning light on the Honda HR-V?
How do you reset the tire pressure warning light on the Honda HR-V?
Honda Hr V (2016-2022 / RU, MK 2) In order to reset the tire pressure warning light on the Honda HR-V, you need to inflate the tires following the pressure values indicated on the sti…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos