Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Accessory kit

See other generations:
Video tutorial

Replacing the original bulbs with LED types inside the cabin will give the car a much more modern and appealing look, as well as improve the internal brightness of the cabin; specific kits are available on the market for each car model containing the correct number and type of LED bulbs for the conversion.

Start with the front dome light by removing just the outer cover; move on to the lights illuminating the mirror under the sun visor, the central dome light, and the one in the boot; then remove the rear lights to also replace the reverse lights; replace the number plate lights by sliding the lamp holder sideways.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Instructions for Installing LED Headlights
Instructions for Installing LED Headlights
Honda CR-V (2012-2017 / MK 4) Replacing the headlight bulbs with LED rather than xenon will give the vehicle a more modern and appealing look while improving visibility; open the …
Replace the Interior LED Bulbs on a Honda CR-V 2009
Replace the Interior LED Bulbs on a Honda CR-V 2009
Honda CR-V (2007-2012 / MK 3) If the bulbs in the interior light of your Honda CR-V mk3 are blown or you simply want to replace them with brighter LED bulbs, you are in the right …
How to Replace the Courtesy Light Bulb with a LED on the Honda CR-V
How to Replace the Courtesy Light Bulb with a LED on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) Learn how to replace the courtesy light bulb with a LED on your Honda CR-V. You will need a plastic spatula to remove the plastic light cover without…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos